Friday , November 22nd 2024
    Truck Parts and Accessories for Off Road Trucks and Jeeps

WFB for Subaru Car Door Projector Welcome Courtesy Shadow Logo Light -2Pcs

Product Features:

    Set yourself apart from the crowd with a WFB Car Door Projector that reflects your tastes and passions. Be prepared to get tons of compliments every time you take it out with you! Features : 1. Direct replacement.No modifications required.No wire cutting. No error or warning on dashboard. 2…
Price as on: 2020-02-21 09:58:13
14.99  

Product Description

Set yourself apart from the crowd with a WFB Car Door Projector that reflects your tastes and passions. Be prepared to get tons of compliments every time you take it out with you!

Features :
1. Direct replacement.No modifications required.No wire cutting. No error or warning on dashboard.
2 . Never used or tried on , Simple installation.Can be done in 5 minutes
3. Voltage:12V with 2000L.

Compatibility:
FORESTER 2011 to 2018(2017 not)
OUTBACK 2012 to 2017
LEGACY 2010 to 2017
IMPREZA 2010 to 2017
TRIBECA 2011
XV 2013
2019 Outback 3.6 Limited
2019 Subaru Ascent

Not fit:
2015 Subaru Legacy 2.5i
2016 Subaru Legacy
Subaru foresters side door
2016 impreza sedan base model
2014 impreza outback base model
2016 legacy base model
Subaru Impreza 2012
2010-2011 Subaru Forester,2013 Subaru Forester
2015 Subaru outback
2008 Wrx

Installation Instructions:
1. Use A Flathead Screwdriver Or Installation Tool To Remove And Disconnect Original Door Step Lights .
2. Plug In new Door Lights With Correspondent Connector.
3. Put new Door Lights To The Spot Where Your Original Step Lights Were.
4. Subaru Logo Should Be Projecting On To The Ground.

Package Include:
2 pieces Subaru welcome light

Product Features

  • Compatibility for Subaru FORESTER 2011-2018,OUTBACK 2012-2017,LEGACY 2010-2017, IMPREZA 2010-2017, TRIBECA 2011 to 2017
  • Using a high brightness LED chip, you will have no trouble viewing the area near your car door, for easy entrance and inspection. Entrylighting LED Laser Projector Door Logo Lights for logo is projected in high definition, crystal clear and with vibrant colors.
  • Forget about wirings, drillings and assemblies. Unlike other car door lighting products, there’s no need for a connection wire. Simply remove the previous door light with the appropriate tool, and plug in your new Subaru logo projector with the corresponding connector. It will take less than 5 minutes!
  • Consuming very little power thanks to LED technology, our car door lighting will be no burden at all for your car battery. Designed to be durable, it will illuminate your car entry space for a really long time.
  • Package includes 2 pieces lights, If you would like to use for 4 car doors, You need to order 2.